The Signature, with its stunning, royal blue, anodised guide rail unit and two tone base, incorporates the same engineering technology as the Autograph. It does, however, provide greater speed, proficiency and simplicity.
The calibrated parallelogram feature not only squeezes human error to an absolute minimum but also enables repetition projects to be completed in a matter of minutes. This will be of particular interest to those who tend to have images of the same size and therefore wish to cut standard size mounts on a regular basis.
Efficiency is key; time is money.
Use the Signature system…
If your images are generally consistent in dimension and shape and typically mounted in windows of the same size. The parallelogram also provides extra support to the mount which is an added benefit.
For anyone who frequently cuts mounts to the same size, the Signature offers you the flexibility of repeatedly cutting the same size window without having to mark up each time. The parallelogram is therefore an advantage both in marking out and cutting of the windows.
Midi, Plus or Maxi?
The Mount Cutter you need depends on the exterior size of mount board you use to mount your images. Identify the size of your largest work and consider the border width around it.
Eg. An image size of 400mm x 300mm (16” X 12”) with a 50mm (2”) border adds up to an exterior size of 500mm X 400mm (20” x 16”) so a MIDI system would suit.
Size Chart
| MIDI | PLUS | MAXI | |
| Max. Exterior Size that can be cut | 620mm 24” | 865mm 34” | 1220mm 48” |
| Max. Bevel Window that can be cut | 520mm 20.5” | 765mm 30” | 1120mm 44” |
